 |
Digital Cameras Photo Reviews of Razer Copperhead Tempest Blue 2000 Dpi Mouse with built-in MemoryCustomer Review: AWESOME!!! Summary: 5 Starsi just got my copperhead this morning (tempest blue if it matters) with the exactmat and i love it, for the most part. the drivers are a little confusing and took some time to setup properly so here are some tips and my setup if you are interested:
(i changed all the windows mouse settings to the middle so i can control it solely with the razer tool)
First of all change the DPI up and DPI down buttons to something else (mine are just off) they just mess with profiles which is what you should really be using to adjust settings. Second DO NOT adjust windows pointer speed in the advanced tab, like the dpi up and down this will just confuse you and is not helpfull...istead adjust sensitivity to your liking, but not yet.
before i get to the profiles let me explain DPI, Polling rate and sensitivity to all of you who don't know your megabytes from your megabits...
DPI & Sensitivity: AKA Dots per inch... the higher the DPI the faster the cursur/crosshair will move. How is this different from sensitivity? you may be thinking to yourself. well... a higher DPI will speed up the mouse without losing any accuracy and a higher sensitivity will accelerate the mouse while losing some accuracy so you should adjust the dpi to near the desired speed and then fine tune with the sensitivity
Polling rate: This is the rate at which the laser takes a picture of the mouspad so 125hz=125 times per second... you probably wont notice the difference unless you are an experienced first person shooter who can tell the difference between a 2ms(500hz) and a 1ms(1000hz) responce time but it is there. there is no reason to search the web on a 1000mhz polling rate so dont. personally i have played counterstrike for a couple of years and i cant tell the difference between 500 and a thousand hz but i trust its there so i use it.
Here is what i have my profiles set to right now(all are set to a sensitivity of 7):
1: 500Hz/800 DPI- browsing internet/casual use
2: 1000Hz/2000 DPI- Gaming(counter strike game sensitivity 2.8)
3: 1000Hz/400 DPI- very accurate slow cursur for photoshop freehand
4: unused will be World of Warcraft profile
5: unused
i used the thumb buttons for forward and back in Firefox
Design: i like how it feels in my had but the grip on the pinky side and also am thinking about cutting it off other than that i love it
Exactmat: i like the reversable sides but it is a little small and the the wristpad annoyys me...would have gone with mantis if i could re-buy
(L. percy is my moms name sw!tchb|ade is my counterstrike tag)
Customer Review: It grows on you... Summary: 4 StarsAt first when I bought this mouse I didn't like it. It just didn't fit my hand the way I was used to holding a mouse.... but after a week or so I really started getting used to it, and now I do find it comfortable. All I can say is give it a chance and get used to it... it grows on you!
Response is great and the on the fly synapse adjustment is nice... handy when you want to change sensativities without going into a setup mode.
Some said you can't use the side buttons... I find that only 50% true. You can use the side buttons on your side, but the far side are not really useful in my opinion.
What you do get is a quality mouse which should last some time...
I find the side rails on this mouse slightly annoying. Thinking I might cut them off with a matte knife and then apply a hot knife to the cuts to soften the edges off.... but not right now, can't justify that in case I mess it up... so sometime in future I will do it.
Customer Review: new mouse Summary: 4 Starsi got this mouse to replace a microsoft intellimouse. this mouse is thinner and longer than the microsoft, which took some getting used to. the side buttons on the right side of the the mouse really can't be used in gaming. the hardest adjustment was the speed at which the mouse moved on the mousepad. with three teflon pads on the bottom it was like greased ice. took some tweaking on the dpi to feel comfortable with it. tracks nicely and the top buttons are super sensitive. overall good mouse, just need time to adjust to it.
Customer Review: Stay away from Razer Summary: 1 StarsGood mouse when it works. Very accurate.
However, the mouse's optical engine died on me within 2 months of use. I have contacted Razer support many times and they have failed to contact me back.
Customer Review: A great buy! Summary: 5 StarsLet's start with the basics:
My computer is midrange. I have a 3.0 Ghz P4, 200GB Hard drive, 1.5gig PC3200 RAM, and a GeForce 6600GT. This places me at the slightly above average range for computers, as I understand it.
The original mouse I used was the stock Gateway ballmouse. Disgusted with it very quickly, I bought a Kensington Optical Mouse. This mouse lasted a little while until one day it mysteriously started dying on me (about a year to a year and a half later).
I replaced it with a Logitech MX610..I'd always wanted a wireless mouse and did not want to spring the extra fourty dollars for an MX1000.
Bad move.
The mouse was terrible for gaming -- mainly I play WoW, Oblivion, and Dawn of War, as well as a touch of Half-Life and Halo. Disgusted with wireless mice almost immediately, I purchased the Razer Copperhead (Tempest Blue) and the Razer Exact pad after reading multiple reviews comparing it, the MX518, and the G5 gaming mouse, and going to my local Best Buy to "field test" (get a feel for) all of the mice. After extensive field testing, I decided that the Razer was the one for me.
Now onto the mouse itself:
-First Impression-
Right out of the box, this bad boy came equipped to do battle. After installing the firmware that came with the mouse, readying the Exact mousepad, and plugging this in, I found myself mousing at an incredibly improved speed. Not to mention my accuracy was almost dead on. I required a few small adjustments (toning the dpi down to 1600 instead of 2000, etc.) in order to keep myself from overshooting due to the sensitivity of the mouse.
-Appearance-
The blue LEDs that surround the mouse look excellent in lit rooms and absolutely stunning in dark rooms. The tri-snake emblem on the top of the mouse pulses slowly and rhythmically. I cannot speak for the other colors, but the blue truly made my desktop a more exciting thing to look at.
-Comfort-
The mouse took a little getting used to, I will fully admit. Its long, tapered buttons suited my large hands perfectly. However, the mouse is not overly bulky. It has a fairly low profile and has more of a delicate touch feel to it when mousing, as opposed to rough push feel of many mice. Moving your cursor is a simple task, with a gentle little flick of the wrist...it feels far more like you're guiding this mouse, instead of forcing it, if that makes sense.
-Software-
Easy to use, easy to figure out, this software has it all. From minute adjustments to how sensitive your scroll wheel is to how fast you need to double-click the mouse in order for it to be recognized as a double-click, the mouse is infinitely customizable.
-Hardware-
Solid and strong feeling, the mouse sticks to your hand nicely. Though it does feel a touch light and delicate, I'm a firm believer that it could take a hit and walk away from it (though why you would want to hit a 60-80 dollar mouse, I have no clue...) The low profile will also take many mouse users a little while to get used to, as every mouse I'd had before had a very high profile. Coupled with the gel wrist rest that can come with the Razer Exactpad though, you quickly forget how low profile it is.
The buttons on the top, as mentioned before, are incredibly convenient. The buttons on the side are not so much however. Being a right-hander, I found the mouse buttons on the lefthand side incredibly easy to reach and use. The righthand mouse buttons however, are nigh-impossible to use. My only guess is that one would use them for the stock setting (to switch dpi on the fly), and probably more likely that they are set there for symmetrical mouse usage by lefties.
The teflon feet that come stock on the bottom of this mouse make it slide over the mousepad like air. Though a bit light to me, you can customize this mouse to make it heavier by purchasing a Razer modification kit from Razer's homepage (costing between 10 and 15 dollars typically). However, using this repair kit voids your warranty.
Conclusion (Pros):
- Visually Appealing
- Incredible Accuracy
- Software makes customizing mouse a very unique experience
- Comfortable Feel
- Low Profile helps cut down on wrist strain
- Top End Construction
- Teflon Feet a huge plus
Conclusion (Cons):
- Price is a deterrent
- Mouse buttons on at least one side will feel all but useless
- Adjusting to a gaming mouse of this quality takes TIME
--- Overall ---
I could not be happier with the combination of mouse and mousepad I now have. A worthy buy? Absolutely. I rate it 5/5 stars...it's just that good.
Edit: September 3, 2007: Over a year (pushing a year and a half!) later and I am still using the same mouse. Unfortunately I have only upgraded my video card (currently a 512mb 7900GT KO), so the processor and pc3200 ram are beginning to drag on newer games. I still play Battlefield 2142, F.E.A.R., etc, on full or nearly full resolution with no problem, however.
The mouse is continuing to function, even after having been dropped several times and the abuse of a 17 year old little brother who stays at my place to dogsit while I am out of town at work.
THE ONLY COMPLAINT I now have is that the teflon feet on the bottom of the mouse are beginning to wear out...I think I need to order more and replace them, as the ice-smooth sliding movement of the mouse has been roughed up quite a bit by the loss of the relatively frictionless feet. Other than that? No problems whatsoever. The driver still work fine, and the mouse is as crisp and responsive as ever!
More Customer Reviews: First Review ‹ 2 3 4 5 6 7 8 9 10 11 ›
|
 |