 |
IOGEAR USB 2.0 to Serial/PDA Converter Cable GUC232A by IOGEAR
Digital Photo Product DetailsManufacturer: IOGEAR Audio: English (Original Language) Format: CD-ROM Release Date: 2011-11-27 Platform: Windows Model: GUC232A Product features: - Product Type - Converter cable
- Warranty - 3 Years Limited
- Power Consumption - 90mA
- Cable Length - 12 in. (30.25 cm.)
Accessories:
Digital Cameras Photo Reviews of IOGEAR USB 2.0 to Serial/PDA Converter Cable GUC232ACustomer Review: Works just fine under XP for me, even better under linux Summary: 5 Stars
I must be the exception here, but this adaptor worked fine for me in XP and 2k. XP didn't even need the driver disk, but pulled a working driver off of windows update automatically. Worked with my old USR modem perfectly, and even worked connected to the console port of a Sun Ultra Enterprise box. 2k needed the driver downloaded off of the iogear website, but then worked perfectly.
If anything, it worked even better under linux: I didn't even have to do anything to get the driver to load; it just worked, where windows made me run through a wizard to get the driver loaded. I didn't try hot-plugging it under linux, but I don't see why it wouldn't work that way too. Even the minimal 50MB DSL distribution worked with this adaptor without any special configuration, again successfully using an old USR modem, and working as a console for a Sun Ultra Enterprise using `microcom -D/dev/ttyUSB0`.
I don't know what I'm doing any differently than the people that say they are having problems with this adaptor, but I've not had any indications of trouble from this device. Under windows, I'm using an old generic driver that was either from windows update (XP) or on the iogear website (2K). The XP driver I am using says it is for an `ATEN USB to Serial Bridge` and is dated 7/16/2003, version 2.0.0.18. Under linux, the generic pl2303 usbserial driver supports this device and gives you /dev/ttyUSBx device links.
I have had good luck with this device, the speed is pretty good and it's fairly small, taking up very little of my precious laptop bag real estate. The price was modest and the construction seems to be fairly durable. Since it is supported under linux, even on a restricted microdistributino like DSL, it is going to be of much more use to me than I might have expected, given that linux support is not listed on the box. I really don't see what else I could want: it works as advertised.
Description of IOGEAR USB 2.0 to Serial/PDA Converter Cable GUC232AThe USB PDA/Serial Adapter (GUC232A) provides you with an external serial (DB- 9 male) Plug-n-Play connection for use with computers, notebooks, and hand held computing devices that support USB. The PDA/USB Serial Adapter has a standard type A USB plug. The GUC232A works great with GPS devices allowing you to convert the serial interface, typically found on GPS units, to USB. This USB PDA/Serial Adapter provides PDAs, digital cameras, modems, and ISDN terminal adapters with high quality serial connections at a data transfer rate of over 230Kbps. This makes the USB interface transparent to serial peripherals, allowing them to easily interface with USB computers. This eliminates the setup hassle found with traditional serial port connections. This device also supports energy saving suspend and resume operations.
|
 |
|
|
|