 |
Corsair Cooling Hydro Series H50 All in One High-performance CPU Cooler CWCH50-1 by Corsair
Digital Photo Product DetailsManufacturer: Corsair Format: CD-ROM Platform: Windows Model: CWCH50-1 Product features: - Integrated pump and reservoir is sealed for zero maintenance and improved protection against leaks. Supports LGA775, LGA1366, LGA1156, AM2/AM3 with brackets for all of them.
- Pre-filled, closed-loop system is easy to install
- Copper CPU cooling plate for maximum cooling performance
- High-efficiency, low-noise 120mm fan for drawing cool air across the radiator
- Two Year Warranty
Digital Cameras Photo Reviews of Corsair Cooling Hydro Series H50 All in One High-performance CPU Cooler CWCH50-1Customer Review: This cooler is fantastic. Mission Accomplished, no doubt. Summary: 5 Stars
I bought this cooler at Microcenter. I am so happy with this choice that I could barely contain myself. I've been looking for a place to give this fantastic cooler it's credit. Amazon is a perfect review place, because many people come here for reviews. The Amazon price is about the same as microcenter, so you can certainly buy it here if you want.
I did not go shopping for a liquid cooler, but for a good air cooler. Luckily I saw this cooler all by itself at the end a row where someone had left it. I did not see it on the shelf. The salesman tried to talk me out of it, in a helpful way, and wanted details about my case to know if it would fit. I told him I didn't know the name of my case, but I knew it would fit, even if I had to drill and cut holes with a jig saw or dremel tool. I am not afraid of those things. If you are afraid of the drill, then you should be very careful with case choice. This cooler may not be for you.
Don't let the fact that it is water (or some mysterious liquid) bother you. It is sealed up tight, never to be opened, and dry as a bone. You will never see, feel, or sense, liquid, unless something goes wrong.
Before I started on this mission I really needed a new cooler. The problem was, was that my Core i7, at stock speeds, using the stock heat sink, reached almost 90 centigrade at full load. I was at full load using DVD fab to convert my DVD for my iphone. DVDFab uses all of the cores at full speed, and doesn't hold back at all. I can convert a DVD in about 8 minutes, which seems unimaginably fast to me. My old system would take hours. Stock temps were idling at 38 or so, Case temps 32-35. Once I saw those temps on my CPU, I shut down DVD fab and wondered what to do. Intel's stock stock cooler would barely keep their CPU safe at full speed. Most people who study this kind of thing will think that CPU temps above 70 are bad, and 80 will cook your CPU. I think 100 will auto shut off the CPU, as per intel specs.
On the back of the H50's box is a little graph. It looks like marketing fluff, so I didn't pay much attention to it. After installation I looked at it again, and the graph is remarkably accurate. It shows a standard CPU heat sink idling at 40C, and 85C at 100 percent load. It shows a "high performance air cooler" at 60C at load. And it shows this cooler a little less than 55C.
Well, my experience significantly outperforms this graph. At 100 percent load, stock speeds, I was getting temps about 45C. Overclocked to the crazy range? 4.1+ GHz, I was getting about 54C. All this time, it was whisper quiet. And I can feel the warm air coming out of the top.
On the web, some builders and reviewers have complained that the instructions are to blow the airflow into the case instead of out. they think it is backwards. They mistakenly think it blows hot air into the CPU. But the real point is to cool the CPU. So, to get the coolest air into the radiator, you should set it up to blow cool air (and therefore air external to the case) into the radiator. Case temps are 10-15 degrees warmer, and will significantly hamper the cooling of the CPU. So just follow directions and blow the air in instead of out. You will, therefore, have to engineer a way to get that hot air out of the case. I have a Thermaltake V3 case. The power supply blows air in at the back bottom, and there is two openings on the top for fans to blow up and out. So my case has air coming in at the back bottom, coming in at the back top for the radiator, and two fans blowing up out of the top. It is ideal for this cooler. I did need to drill a couple of extra holes for fan mounting screws, and I did need to mount the fan outside and attached to the radiator inside. The fan wire comes out a miscellaneus hole in the back of the case. With this adaptation, all my hot air comes out the top. Case temps as I type this are 30C. Room temp is about 24C.
Here is my case http://amzn.com/B002Q2M8KK . I did not need to take out the motherboard because this box has a special hole to get to the the back side of the CPU.
This is clearly the best cooler for the money, no question about it. It outperforms anything close to it in price, and it is barely audible. The two year warrantee is just icing on the cake. If you are a system builder, buy one. You won't be sorry.
Description of Corsair Cooling Hydro Series H50 All in One High-performance CPU Cooler CWCH50-1The Corsair Cooling Hydro Series H50 high-performance CPU Cooler is quiet, easy to install and outperforms even high-end air coolers. You get superior cooling for improved overclocking performance without the complexity of traditional water-cooling systems. The simple, closed-loop design delivers the power of liquid cooling and the ease of installation of traditional air coolers. The H50?s small size lets you enjoy a less crowded case with better airflow, and you can use the included ultra-quiet, high-efficiency 120mm fan or simply connect the radiator to one of your existing case cans. Air-based CPU coolers simply aren?t as efficient as water coolers, and can take up too much valuable space. The compact, closed-loop Hydro Series H50 takes your CPU?s temperature to new lows and takes up less room doing it.
|
 |